Saturday, September 2, 2017

Friday evening and Saturday activity

Just as the sun was setting Friday evening the container ship Brotonne Bridge got underway from Fairview Cove for sea. The Cerescorp container terminal had been particularly busy over the past few days, with ships anchored in Bedford Basin waiting to berth.

With Atlantic Oak made up astern as tethered escort, Brotonne Bridge begins to make its turn for the Narrows.

Built in 2010 by Samsung Shipbuilding + Heavy Industry in Koje, the 46,444 grt, 58,200 dwt ship has a capacity of 4526 TEU. It is working on the AL6 service of THE Alliance.

The new cruise ship Mein Schiff 6 made its first call in Halifax this morning. Completed in May of this year and christened June 1, the ship was built by Meyer Turku Shipyard in Turku Finland, for Tui Cruises of Germany.

There was quite a crowd awaiting the arrival of the ship on cool crisp morning in Halifax.

The 98,811 grt ship has a capacity of 2,790 passengers and has a crew of 1,030. The ship follows the design of two previous ships, Mein Schiff 3 and Mein Schiff 5, that have proven very popular with German passengers.

Things moved rather slowly in the harbour thereafter. The expected arrival of the small container ship Berta did not happen at 1100, but closer to 1200.

Scotia Pilot returning from the pilot station, having embarked the pilot on Berta, was making good speed and lots of spray.

This was the first chance I had to see the new pilot pilot boat Scotia Pilot in operation. It certainly appeared to be steady and fast, but generated a lot of spray, most of which was kept off deck thanks to the large bow flare.

Berta is certainly in the small range for a container ship, with a capacity of 645 TEU in a ship of 6264 grt, 7400 dwt. It is owned by Intersee Schiffarts of Germany, and flies the Antigua and Barbuda flag.

With the tug Atlantic Willow tucked in on the starboard quarter to assist, the ship will be turning to back into pier 31.

It is operating for Nirint with bagged nickel sulfides from Cuba. After discharge, using its own 40 tonne cranes, it will be heading for Rotterdam.

Meanwhile out at number one anchorage the CMA CGM Nabucco had completed its Canadian Food Inspection Agency inspection for Asian Gypsy Moth larva, and had weighed anchor, but awaited the passing Berta before moving alongside pier 41.

Using three tugs, Atlantic Oak, Atlantic Fir and Spitfire III the ship gets underway from the nearby anchorage area.

The ship first called in Halifax in May of this year, but I did not get a photo. It is one of four sister ships (the other are CMA CGMs La Traviata, Otello and Tosca) in the CMA CGM fleet. So far CMA CGM Otello is the only other one of the class to appear in Halifax on the Columbus Loop service. Built in 2006 by Hyundai Heavy Industries in Ulsan, the 91,410 grt, 101,810 dwt ship has a capacity of 8488 TEU (including 700 reefers).

The ship used three tugs, but this did not cause delays elsewhere in the port, as Atlantic Towing Ltd appears to have augmented its Halifax tug fleet to four tugs - something that has been needed for some time.

.

No comments:

Post a Comment